| Both sides previous revisionPrevious revision | Next revisionBoth sides next revision |
| articles:as9100d_oe_requirements-2 [2019/08/18 18:52] – rrandall | articles:as9100d_oe_requirements-2 [2019/08/18 21:30] – rrandall |
|---|
| Regarding the "records" we require the organization to retain documented information on how they ensure production process verification is implemented.//"</note> | Regarding the "records" we require the organization to retain documented information on how they ensure production process verification is implemented.//"</note> |
| |
| <note important>**# 26** \\ AS9100/ISO 9001, sec. "9.3.2 Management Review Inputs" states: \\ The management review shall be planned and carried out taking into consideration: \\ c. information on the performance and effectiveness of the quality management system, including trends in: \\ 2. the __extent to which quality objectives have been met__; \\ \\ When asked "//Is every process established by an organization required to have at least one quality objective?//" (ref. AS9100/ISO 9001sec. 6.2.1), the official response provided in the "[[https://asq.org/quality-resources/iso-9001/us-tc176|US TC 176 - TG22 - Interpretations]]" (US# 2018-04) stated: // No. (6.2.1 ...shall establish objectives at "relevant" processes...) It may NOT be relevant to set an objective for some processes.//</note> | <note important>**# 26** \\ AS9100/ISO 9001, sec. "9.3.2 Management Review Inputs" states: \\ The management review shall be planned and carried out taking into consideration: \\ c. information on the performance and effectiveness of the quality management system, including trends in: \\ 2. the __extent to which quality objectives have been met__; \\ \\ When asked "//Is every process established by an organization required to have at least one quality objective?//" (ref. AS9100/ISO 9001sec. 6.2.1), the official response provided in the "[[https://asq.org/quality-resources/iso-9001/us-tc176|US TC 176 - TG22 - Interpretations]]" (US# 2018-04) stated: // No. (6.2.1 ...shall establish objectives at "relevant" processes...) It may NOT be relevant to set an objective for some processes.// \\ \\ However, when asked "//Is it the intent of the standard that an organization can have just a top-level requirement(s) that is used to evaluate the effectiveness of the QMS and several individual processes without those processes having specific metrics? For example, OTD of product to the customer of 98% is the top-level metric and the metric used to evaluate the effectiveness of the purchasing process, contract review process, and the manufacturing process with no additional metrics. So if they have met the OTD of 98%, then all processes are deemed as effective.//" (relating to sec. 4.4.1c & g), the IAQG official [[https://www.sae.org/iaqg/projects/9100-2016_clarification_table.pdf|"AS 9100:2016 Series Clarifications"]] responded: "//No. 9100-series standards require the organization to determine if the identified processes are effective and achieving planned results (see clause 4.4.1c). Each process measure should evaluate the effectiveness of that process and be value-added. This is the measure that would be included in Process Effectiveness Assessment Report (PEAR) as the key performance indicator for that process. \\ The 9100-series standards does not mandate a certain number of process measures. Small organizations typically have fewer measures than larger organizations. These small organizations have increased visibility regarding process health due to their size. Regardless, this does not alleviate the need for determining if processes are effective and achieving planned results. The organization can have additional working level measures that may not flow up to top management or management review.//"</note> |
| |
| <note important>**# 27** \\ When asked "//If action is taken under section 10.2.1, c) that addresses a cause, but not the "root" cause (e.g., 1 why vs. 5 whys), is a review of the effectiveness of corrective action (part d) required?//", the the official response provided in the "[[https://asq.org/quality-resources/iso-9001/us-tc176|US TC 176 - TG22 - Interpretations]]" (US# 2019-01) stated: //Yes. Experts agree that the intent of 10.2.1d (review the effectiveness of any corrective action taken) is to ensure that the organization manages nonconformities, and implements corrective action, appropriately. \\ ISO/TS 9002:2016 states in Clause 10.2.1, "The organization should review the effectiveness of any corrective actions by confirming (through evidence) that the actions have been implemented or correction taken and as a result the nonconformities have not recurred."// \\ \\ However, when asked "//Is it a requirement of ISO 9001:2015, Subclause 10.2, to __document__ the root cause analysis?//", the official response provided in the "[[https://committee.iso.org/files/live/sites/tc176sc2/files/documents/Interpretations/ISO9001_2015_Approved_Interpretations.doc|ISO/TC 176/SC 2 Listing of Approved Interpretations against ISO 9001:2015]]" (RFI# 134) stated: //No. This is because ISO 9001 does not address “root cause analysis”.// </note> | <note important>**# 27** \\ When asked "//If action is taken under section 10.2.1, c) that addresses a cause, but not the "root" cause (e.g., 1 why vs. 5 whys), is a review of the effectiveness of corrective action (part d) required?//", the the official response provided in the "[[https://asq.org/quality-resources/iso-9001/us-tc176|US TC 176 - TG22 - Interpretations]]" (US# 2019-01) stated: //Yes. Experts agree that the intent of 10.2.1d (review the effectiveness of any corrective action taken) is to ensure that the organization manages nonconformities, and implements corrective action, appropriately. \\ ISO/TS 9002:2016 states in Clause 10.2.1, "The organization should review the effectiveness of any corrective actions by confirming (through evidence) that the actions have been implemented or correction taken and as a result the nonconformities have not recurred."// \\ \\ However, when asked "//Is it a requirement of ISO 9001:2015, Subclause 10.2, to __document__ the root cause analysis?//", the official response provided in the "[[https://committee.iso.org/files/live/sites/tc176sc2/files/documents/Interpretations/ISO9001_2015_Approved_Interpretations.doc|ISO/TC 176/SC 2 Listing of Approved Interpretations against ISO 9001:2015]]" (RFI# 134) stated: //No. This is because ISO 9001 does not address “root cause analysis”.// </note> |
